◆Product description：

The continuous belt vacuum filter uses filter cloth as the filter medium. It is a separation device that makes full use of material gravity and vacuum suction to achieve solid-liquid separation. The integral ring rubber belt is used as the vacuum chamber. The annular belt is driven by the motor to run continuously, and the number of filter cloths runs synchronously with the belt. The belt contacts the annular friction belt on the vacuum sliding table and forms a water seal. The slurry is evenly distributed on the filter cloth by the distributor. When the vacuum chamber is connected to the vacuum system, a vacuum filtration zone is formed on the tape. The filtrate passes through the filter cloth and is collected by the horizontal groove on the tape and enters the vacuum chamber through small holes. The solid particles are trapped on the filter cloth to form a filter. cake.

The working principle of the continuous belt vacuum filter is to use a vacuum pump to draw a vacuum on the rotating filter cloth. The filter material is evenly applied to the filter cloth and rotates with the filter cloth. The vacuum chamber of the filter at the bottom draws vacuum under the action of the vacuum pump to filter the filter cloth. The water in the filter material on the cloth is extracted. The filter can be widely used in solid-liquid separation in metallurgy, mining, chemical, paper, food, pharmaceutical, environmental protection and other fields, especially in the application of gypsum dehydration (FGD) in flue gas desulfurization.

◆Device parameters ：